Released on October 21, 2018 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the NFM1 paintjob, and another one with the livery from the MDX mod. Fully repaintable. Awesome box art by Xarc. Wheels by Cat. Big, a bit stiff...

Released on October 7, 2018 - This'll move ya, this'll groove ya, feel the rhythm movin' through ya. This'll move ya, this'll groove ya, feel the rhythm movin' through ya. Modelled & textured by Burner94, parameters by yours truly. A VK Commodore in RV style. I had become evermore fascinated with australian cars since they started...

Released on August 10, 2018 - As soon as I saw Xarc's Panorama, I knew I had to give this drawing by Kajeuter another go, because the roofline was very similar. Kajeuter drew this in 2011 and I attempted an admittedly bleh recreation of it back then. It's now back and completely overhauled from the ground up. Wheels by Cat. Shoutout...

Released on August 3, 2018 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the 'example car' livery from the NFM car editor, and another one with the livery from the MDX mod. Fully repaintable. Awesome box art by Xarc....

Released on July 7, 2018 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the NFM1 paintjob. Fully repaintable. Awesome box art by Xarc. Wheels by Cat. A very light FWD, watch out for weapons. Predictable, yet a bit slidy....

Released on June 27, 2018 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the NFM1 paintjob. Fully repaintable. Awesome box art by Xarc. Wheels by Cat. A rail-ish RWD classic race car, not that inspiring to drive but...

Released on June 21, 2018 - A repaint Burner had sitting around with nothing being done with it, so he threw it to me and I made params for it. The idea was based on Riva TNT2's legendary parameters, only not as chronic. Top speed is 37.1 MPH so just shy of Panga TC but that handling is going to take a lot of getting used to and...

Released on June 17, 2018 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the NFM1 paintjob. Fully repaintable. Awesome box art by Xarc. Wheels by Cat. Your typical leany SUV, falling at the bottom edge of the Rookie...

Released on June 8, 2018 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the NFM1 paintjob. Fully repaintable. Wheels by Cat. Huge shoutout to Mladen who provided me a better hull and helped me setting up the suspension...

Released on June 4, 2018 - This is my first conversion from Need For Madness 2, I'm gonna cover them all. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate skin with the NFM1 paintjob. Fully repaintable. Params aren't my best, but I think it feels good enough...

Released on April 24, 2018 - A Gran Turismo 2 conversion which I started working on way before the GT2 model viewer/exporter was a thing. I completely remade the body once it came out. RWD drag-like Pro params. Thanks to Saffron for the wheel mesh and a huge shoutout to Xarc for some carbox hints! ...

Released on April 23, 2018 - Just a novelty piece born from some random talk with Marv. My first car totally built using Marv's Blender add-on, and also my first to use semitransparent textures. Drives very similar to Banhammer. ...

Released on April 15, 2018 - A BossVolt remodel (and slight reparam) which took inspiration from military troop transporters like the Barracks from the GTA franchise. Model by me, texture and parameters (and some model fixes too) by Xarc. ...

Released on April 5, 2018 - First actual co-op with Xarc. I always wanted to see how a street-legal BigVolt would look like, and Xarc himself already had some ideas for a paintjob for a car, so we joined our forces and here it is. Parameters aren't for everyone - it drifts and slides like nothing else in its class and has massive...

Released on April 3, 2018 - My first 'serious' original I made in Blender, sat on my hard drive for a long time with some polycount issues - huge shoutout to Kratos (@ ARM) for the poly-reduction and some stuff on the BMP! Parameters aren't my best effort, but they do the job. 1024x texture. ...

Released on March 31, 2018 - Random meme-car I whipped up some time ago but never paramised/finished up properly. Works good on short tracks since it's slow but grippy. Wheels by FZG. ...

Released on March 30, 2018 - One of two cars I made a while ago but never submitted here... Here's one for the Hatsune Miku fans, lol. Weird but competitive RWD parameters by FBV-86. ...

Released on March 30, 2018 - Another car I had sitting here for a while and never uploaded on RVZ. Sort of a tribute to those creature-like things by Alex Coombes. FBV-86 provided some Clockwork-ish (but slightly more usable) parameters. ...

Released on October 26, 2016 - (No description provided.) ...

Released on December 23, 2014 - Bendy Coupe, from Motor World Car Factory. Used NY 54's mesh to make this, it's not 100% accurate but I can't seem to figure out how to model that roof properly... 1024x1024 skin, fully repaintable. Parameters by Citywalker.Extract from Citywalker's handling notes: • A bit understeering at...

Released on October 15, 2014 - Drift-oriented repaint of Skarma's Reliant Robin. Uses Cat's wheels, just rescaled and remapped. Comes with carbox. No custom shadow, feel free to add one if you want... Not selectable by the CPU since it's a full-drifter setup. ...

Released on October 11, 2014 - Idea by Kyllien. Slidy but fast 4WD parameters. Had this sitting around here for too much, so I upped it. Enjoy :) EDIT: removed unnecessary files, added a stock-like carbox courtesy of Xarc. ...

Released on October 5, 2014 - A repaint of my remapped Aquasonic, which was made as a dedication to Hotrodder (aka Hotrodracer463), a great repainter of this community, since the remapped Aquasonic was originally intended to be made for him. Nothing special, but I thought of sharing it with y'all. Stock Aquasonic parameters. ...

Released on October 4, 2014 - Just for you repainters out there. Completely skinnable, even asymmetrically (comes with an unwrap texture sheet just in case). Wheels by Cat, stock Aquasonic parameters. Will consider making more of these remapped things, stay tuned. ...

Released on September 8, 2014 - A crappy original I made a while ago. Technically speaking it could be an on-par Advanced "car", but again it's a meme... you get the point. I owned this phone back in 2014 when the "car" was created, so there you have it. "Skin" found on the-blueprints, credits in the image itself.   EDIT Aug 30, 2021:...

Released on September 4, 2014 - An original I wanted to release some time ago. Uses Iron Bob's axles and wheels. Texture by Marv. Tricky parameters, watch out because it's bouncy and tall. ...

Released on September 1, 2014 - Just a crappy original I made for Skarma, since he likes to put pink boxes in his cars' BMP files, I just thought, why not. Center image in preview is the actual car itself, so be prepared. Leans a lot in corners. ...

Released on August 12, 2012 - No description ...

Released on August 7, 2012 - I totally forgot this was even on RVZ/RVW, and now that it's possible I took the liberty to edit the package name to a more meaningful one. Will add images too at some point. A total conversion pack I did a long time ago that might need a bit of love and care to be brought up to current standards. This...

Released on February 10, 2012 - No description ...

Released on January 16, 2012 - No description ...

Released on January 9, 2012 - No description ...

Released on December 25, 2011 - No description ...

Released on December 20, 2011 - No description ...

Released on October 31, 2011 - I totally forgot this was even on RVZ/RVW, and now that it's possible I took the liberty to edit the package name to a more meaningful one. Will add images too at some point. A pack of reparammed stock RV cars with liveries based on real-world tuning companies I did all the way back in 2011 with param...

Released on September 12, 2011 - Complete re-do based on a regular Adeon. New Super Pro parameters by FBV. Includes an ANM-style alternate carbox. ...

Released on August 13, 2011 - This 9 year old abomination just got a well-deserved update - the concept was promising, but 2011 me didn't really develop it properly. The big wheels in the back and the humongous rear wing are both gone, the car is now properly mapped and repaintable (it comes with a PSD paintkit) and features texture-drawn...

Released on August 13, 2011 - No description ...

Released on July 27, 2011 - Complete re-do based on a regular Adeon. Includes a red variation that will be included in FBV's ANM mod, and an ANM-style alternate carbox to match. Parameters are mostly the same. ...

Released on July 3, 2011 - EDIT Nov 29th, 2020: Full 2020 rework. Model redone completely, wheel mesh by Cat. Custom hull made in Blender 2.73 with Jigebren's plugin. Skin inspired by the Cotton Star Z7 from KartRider. Includes a PSD paintkit. Reparammed to fit the Rookie class, AWD grippy feel, but lacks speed and presence on...

Released on May 24, 2010 - No description ...