Released on April 1, 2024 - It's a racecar, what else to say. "Obvious" pun aside... Made this for fun (mostly using texture baking) quite a long time ago, but after getting asked by a couple fellow Re-Volters if I had anything in mind for this year's April Fool's, I just said "screw it", polished it a little bit and released it. No...

Released on December 11, 2023 - An idea that came to my mind soon after Norfair released Phatendo. Made (mostly) with texture baking using both Adeon and Phat Slug's textures and models - technically repaintable, mapping is friendly enough, but no paintkit. Wheel mesh by Cat. Drives somewhat like a slower, softer-sprung RWD electric...

Released on November 27, 2023 - Skarma's favourite IRL car (or at least one of them) - the Ford Escort RS Turbo. Now in lore-friendly RV form with some bits taken from the mk3 and mk4 Escorts, as well as some fantasy details here and there. Comes with three skins: white racing livery, blue racing livery, plain blue. The name is a nod...

Released on November 26, 2023 - After a very long time, here's another dyXoft Revival car. Model and early textures by Mladen, I parammed the car and gave the texture a little bit of love and care, plus various fixes. Cat logo generated with Craiyon and edited manually later. Drives about how you'd expect a rally-raid Aquasonic to...

Released on September 6, 2023 - It might be an ARM related project, but it doesn't involve Lo Scassatore's moniker :P Trivia:Gigi once tried to recreate (as CONTINUOUSLY requested by RobDin00, wink wink nudge nudge) the Dust Mite seen in the loading screen (see where LS comes from now?) using parts from the vanilla car and our Superfox...

Released on July 31, 2023 - Another mesh of mine I had on the back burner for way too long. Uses the same wheels as Oinknator, courtesy of Ziggy - just remapped. Parameters by Skarma. It's a stocklike Tesla Cybertruck - it's electric, it's big, it's reasonably quick and it can do offroad just fine. Nothing more to say about it...

Released on May 14, 2023 - Hey everyone! This is my attempt at a stock-like (well... ish? Similar to Superdriver in a sense...) Hoonigan "Hoonipigasus" Porsche 911 hillclimb racer. Based on Ziggy and Paperman's Blue Code, some details were taken from it. Parameters by Skarma. Comes with a PSD paintkit as per usual. Following the...

Released on April 29, 2023 - My car submission for the Birthday Contest 2023 is now also officially available as a standalone. Originally not intended to be entered in the contest, but hey, the theme was "more than four wheels", so :P I've had the idea of experimenting with "infinity mirror" effects while at work, and I was really...

Released on March 19, 2023 - Well... After something like a 4 year hiatus, here it finally is. Originally conceived as a more powerful counterpart of Sprint Ace and planned to be released alongside it. Loosely inspired by the Mazda MX-5 Super 20. This car was born as a simple repaint of Sprinter XL with just some minor model tweaks,...

Released on March 6, 2023 - This car was built from an AI generated image (using DALL-E 2), slightly edited by RVW user MadRRacerTurbo, who also uses it as profile picture: I thought it'd make a great car for RV so I reached out to him, willing to put it into the game. Fast forward a couple months (real life and all...) and here...

Released on December 4, 2022 - Yet another car I had in the works since ever, probably even longer than Sneaky. Obviously based on the Chaparral 2J, with some fantasy bits here and there and vague hints at the Tamer from Ridge Racer Type 4. Yes, it only has one fan at the back, but I wanted it to be animated, so there goes... Multiple...

Released on November 23, 2022 - This car originated from some racecar talk between TTDriver and myself, knowing his interest in classic and vintage open wheel machinery. Based on the iconic Lancia/Ferrari D50, the first Grand Prix car to ever feature side pods (as streamlined fuel tanks, in this case) - which later became a staple...

Released on November 19, 2022 - Yes, that's exactly what it is - and I'm honestly surprised no-one made one for RV yet, with the year about to close up... A stocklike take on the infamous Nike One 2022, featured in (and designed specifically for) Gran Turismo 4. It features custom axles and a translating/rotating aero bit as the spinner....

Released on November 5, 2022 - Just a fun idea I conceived a while back, when I was building the reduxed model and texture for Xarc's YI-1 and Little Sweetie. I initially planned to make it as some sort of tribute to the Monster spec Fiat 500 Abarth featured in The Crew, but then the Spooktober 2022 event started, so I thought "why...

Released on November 1, 2022 - An old project and "dream" originally built by Gigi, with a revamped model and a fresh coat of paint by yours truly. This car started its life as "Futuristic", a lightning-decorated space age car with a gimmick: the rear section is hollow and contains a rotating cylinder with lights, simulating a Matrix-style...

Released on September 3, 2022 - Originated from a Hot Wheels discussion on the RVW Discord - LivingWithGames showed interest in seeing a stocklike rendition of this, so here it is, after several months spent in dev-hell. Technically a remodel and retexture of the Hot Wheels Turbo Racing model found in Citywalker's pack (upscaled to...

Released on August 30, 2022 - Files found in TCPlus Project ...

Released on August 30, 2022 - Files found in TCPlus Project ...

Released on August 30, 2022 - Files found in TCPlus Project ...

Released on August 30, 2022 - Files found in TCPlus Project Paintjob and parameters by burner94 Model by Trixed ...

Released on August 26, 2022 - A while ago Tubers reached out to me showing this great Hoonicorn-styled mesh, asking me if I could make details for it once it was mapped and all... needless to say I got permission to go a bit overboard with it :P the details draw inspiration from several Mercury cars like the Cougar Eliminator and...

Released on July 5, 2022 - We promised we'd release it, and here it finally is. Based on the Nissan R390 GT1 and built from its TMAM rendition. Think of it as Nakajima's handling focused sibling, trading precision and acceleration for some of its well-known ballistic top speed. Parameters by Skarma, carbox by Paperman. Comes with...

Released on May 18, 2022 - TTDriver was working on this car almost a full year ago (some files date back to November 2021) and hit me up to do some livery work on it. I accepted, but I initially was a bit busy getting my own WIPs out of the way... Anyway, here it is, at long last. I also took the liberty to fix some alignment...

Released on April 17, 2022 - You've seen Phateca. You've seen Identity Crisis. You may even have seen Yinisaeger if you're familiar with the All's Fair competition over at I/O. Well... This monstrosity-on-buggy-frame is (obviously) a combination of Trixed's Shino, MightyCucumber's Shinobi and my own Hoshino. Made using texture baking. A...

Released on March 14, 2022 - At long last, it's finally here. What do you get by mixing the two most famous vans in triple-A racing game history? A serious tarmac ripper... with a ladder and pipes on top, naturally. Parameters by Skarma. Includes a PSD paintkit, just like the original Triton. Skins for Triton can be made compatible...

Released on March 7, 2022 - My entry for the RVW birthday contest, now uploaded as a standalone file and with an added PSD paintkit, in case any repainter would fancy it. No other changes were made. Just a pint-sized American barge carrying Mexico's own flag colours and emblems. Quite softly sprung, RWD and not overly powerful...

Released on February 8, 2022 - Whew, it's been a while since I last posted a car... This tracked snow vehicle was in the works for the whole winter (I mean, duh, lol) but I've only finished it up during this very week, and all it was missing were a hull and parameters. Credits to MightyCucumber, since the running gear is based on...

Released on September 15, 2021 - Made for the Abandoned Designs Project Plus (ADP+).Just like Moby Trick, it comes from a rework of an older mesh remodelled by Trixed, and like Proto Combo it is built from the lib7a image. It takes a fraction of a second for this ultralight RWD on-road buggy to lose it, so it was given easy handling...

Released on June 15, 2021 - Cross-post by me, car by Marco repainter and LuckNos with additional help from Vas0sky and myself. Translated original readme below: Base idea, sketch: Marco Original 3D model: LuckNos Final 3D model: burner94 Texture: Marco Parameters idea: Marco Parameters: Vas0sky Special thanks to Luck Nos for his...

Released on June 11, 2021 - This particular ADP+ vehicle was more of a challenge than anything else. The sketch it's based on mostly evokes the shape of an open wheeler or buggy, but in the words of FrenchFry "I can see a Can-Am shaped body in there...". So I just went to the drawing board and ultimately this was born... Paintjob...

Released on April 24, 2021 - After a several year hiatus, it is finally here. PaintHeart modelled this car a long time ago and I became interested in it, being a massive Hot Wheels fan myself. I optimised the engine parts a little bit and polished the rear fenders, then remapped the whole thing and baked Ambient Occlusion to give...

Released on March 18, 2021 - Rework of Xarc's Eatium, made to resemble a late '00s Ford Transit. Remodel, detailing and alt skins by me, main skin by Norfair, parameters and name by Skarma. Comes with a PSD paintkit with rasterised individual layers for maximum compatibility. It's no racecar, but its sheer bulk and soft suspension...

Released on February 7, 2021 - A Genghis Kar remodel made by Trixed that just stayed there collecting way more dust than it should've. I picked it up a long time ago and only managed to skin it in January 2021... glad to finally be able to release it. Made for the Abandoned Designs Project Plus (ADP+). Amateur 4WD params - lots of...

Released on June 20, 2020 - Here it is, it's been a while. A much needed polished version of Xarc's classic, Sater XL/Silver Flame. Parameters and hull adjustments by Saffron, everything else by me. Shoutout to Xarc and MightyCucumber for the decal sheets. Hood logo by Norfair. Includes a PSD paintkit, as per usual. More of these...

Released on April 29, 2020 - A serious description for a totally not serious 'car'... what is this? Had the idea for a while after seeing this meme for the first time. Speech bubble is a spinner. This car HAD to have Toyeca parameters (and even hull) for the sake of extra added memery. And speaking of memery... This 'car' is my...

Released on April 9, 2020 - A street-oriented remodel and remap of the Xarc classic - Frollin. Went for a Las Vegas/nightlife inspired paintjob. Handles quite similarly to Frollin as well - compensated for the smaller wheels by altering some suspension bits. A soft sprung, moderately heavy 4WD SUV, kinda handles like one, haha....

Released on March 16, 2020 - Finally, here it is. Hotrod/chop-top version of Pops with no fenders, a blown V8 and smokestacks. Comes in a variety of skins, all courtesy of FZG - I just made a PSD paintkit and fixed a couple asymmetries. Parameters, hull and carbox by me - again, shoutout to norfair, Skarma and Saffron for hull related...

Released on March 13, 2020 - I got sent this Ford AA wannabe by L!LMexican, and he asked me if I could build him an All's Fair car out of it. Was pretty satisfied with the result, but I thought this could as well live again as a stocklike car with sensible parameters, so I teamed up with FZG and Pops was born. Most of the visuals...

Released on November 29, 2019 - Wind Up by FZG was binned from the RVIO packs due to uninspiring 8-bit like graphics on its original texture and semi 3D wheel models, though it's always been an interesting car both to drive and to look at. So when I asked FZG if he wanted to co-op in giving it a stock-like treatment, he quickly whipped...

Released on October 15, 2019 - Top Speed: 36 MPH/ 58 KPHAcceleration: 2.14 m/s²Mass: 1.6 KGTrans: RWD Minor remodel of Blue Meanie so it now resembles the VL Commodore SS Group A SV. Slower but better handling than it's predecessor. ...

Released on October 6, 2019 - Another original by Stephi. This time, it's a mesh made with a Spin modifier, instead of primitive Blender meshes. Params by FBV-86 (from ARM). Very soft suspension and lots of body roll make this kawaii cone shaped thingy really fun to drive, even offroad. An okay runabout in the Rookie class. Hull...

Released on September 30, 2019 - Stephi's first original. Comes with an additional skin if you really fancy some extra kawaii. Params are a joint effort between FBV-86 (from ARM) and myself: it's a bit weird and floaty (hey, it's a gaseous planet after all) and very light, so watch out for weapons. Top speed is somewhat high for Semi-Pro...

Released on August 4, 2019 - A novelty item suggested by Stephi during a Discord call, a lowpoly 3D rendition of a well known Korean cartoon character. Rookie 4WD parameters. Box art by Stephi. ...

Released on August 3, 2019 - After a bit of a hiatus, here's another NFM conversion, more will come at a later date. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes a green variation of the regular skin from DS Mod. Partially repaintable (the black bits need to stay,...

Released on April 21, 2019 - Another 'dyXoft Revival' car, more to come. Tried to experiment with an oval racing inspired car: Pro, RWD, a bit understeery but pretty fast. And yes, it's indeed a nod to the 'Hornet' from Daytona USA, now that we were at it :P Model by Mladen, skin by me. 1024x BMP, fully repaintable. Includes a .psd...

Released on March 4, 2019 - Spec sheet:Top speed: 56.5 km/hAcceleration: 2.35 m/(s^2)Mass: 2Transmission: 4WD A random idea I had after seeing the 2017 release of the Hot Wheels Custom Ford Bronco. Mostly BigVolt (but remapped, with 512x512 texture), with some extra touches. Custom springs made out of two RC Bandit spring models,...

Released on February 19, 2019 - FrenchFry asked me to stockify a Toyota GT-one, so I took the conversion by The Me and Me and gave it some much needed love. Skarma was interested in paramising it, and gave it Super-Pro levels of performance - it's not your average mid '00s railer though! Not that bad through bumps, but it has a somewhat...

Released on January 27, 2019 - A vehicle... thing I had in the works since mid 2018, thought the whole Pokémon-RV crossover idea was pretty neat so here it is. For the actual vehicle, I took inspiration from the Matchbox casting 'Meter Made'. Comes with working springs and axles, my very first fully original car to feature that....

Released on January 15, 2019 - Another NFM conversion. Special thanks to RexyWood for providing me the original models in .obj format and the engine sounds. Includes an alternate ivory white skin and the flamed paintjob from DS Mod. Fully repaintable. Awesome box art by Xarc. Wheels by Cat. Turned out a bit more rail handling than...

Released on December 24, 2018 - An original model of a sleigh I had sitting around with no parameters since December 2017. After giving it some wheels and entering it in Christmas Carnival 2018 I thought of releasing the original, wheel-less one too, with parameters (and carbox) by Xarc. An average and consistent Rookie '4WD car'....